Precision metal lathe 440x1280 mm - 5,5 kW Optiturn
Precision metal lathe 440x1280 mm - 5,5 kW Optiturn
TX4414 400V

Precision metal lathe 440x1280 mm - 5,5 kW Optiturn

TX4414 400V
Item on order
Custom item
Why buy from Vynckier?
+ 15.000 references chosen by our experts
family business with 30 years of experience
The benefits of this product:
  • Number of speeds: 12
  • Travel cross slide: 290 mm
  • Power motor: 5,5 kW
  • Distance between centers: 1280 mm
Read more

Precision metal lathe with digital reading DPA32 on 3 axes.

Capacities:

  • Center height: 220 mm
  • Distance between centers: 1280 mm
  • Spindle bore: 52 mm

Advantages:

  • Machine base and bed in highly ribbed special cast iron
  • Extremely powerful 5.5 kW maintenance-free motor
  • Electronic brake on the main spindle
  • DPA32 digital reading on 3 axes
  • SWH5-B quick change turret

Suitable for:

  • Industry, maintenance services, maritime

Characteristics:

  • High stability of the spindle housing thanks to highly ribbed 25 GG cast iron
  • Hardened and ground transverse spindle ensuring high precision
  • Thanks to a strong reduction in chips during scraping operations, the finest surfaces can be obtained as well as very tight tolerances
  • Many threading and turning options without changing the gears
  • Prismatic bed guides hardened and ground
  • High quality cast iron base in one piece
  • Main spindle works perfectly on precision ball bearings
  • With centralized electrical controls:
    - Push button for pitch deactivation
    - Feed spindle drive
    - Machine lighting
    - Activation cooling pump
  • The electrical routing is in a sheath. This avoids cables hanging down in the coolant and allows the electric cables of the trolley to be properly guided
  • External cooling pump with chip filter with steel tank, according to standards, for easy cleaning
  • Camlock spindle connector DIN ISO702-2 N° 6
  • High and precise finish
  • The gears and shafts are hardened and ground, operating in an oil bath with precision bearings
  • Central lubrication system for the bench
  • LED lighting according along the length of the rear protection cover
  • With DPA32 digital readout, IP67 coding units, height accuracy can be used in the toughest conditions

Securities

  • Separate emergency stop, motor protection and main lockable switch
  • Large splash guard with sliding protection of the tool holder
  • Metal protection of lead screw and feed bar
  • Foot brake
  • Electronic brake on the main spindle
  • Electronic disconnection of the Z axis feed
  • Chuck protection with microswitch
  • Hand wheels and direction switch tested according to EN23125
  • Gear levers tested according to the life cycle EN ISO 13849
  • No load voltage; 24V low voltage control buttons
  • Back panel easy to remove for maintenance

Delivered in series with:

  • 3-jaw chuck, direct mounting ø 200 mm, Camlock 6
  • SWH5-B quick change turret
  • Reducing sleeve MT6 to MT5
  • 1 long fixed center MT6
  • 1 short fixed center MT3
  • Service keys
  • Filled with high quality gear oil
  • English manual, inscriptions, CE marking and CE certificate according to the machine directive 2006/42/CE and the EMC directive 2014/30/CE

Advice: Do not forget to order your steady and follow rest. Installation, commissioning and training by qualified technicians on request

Specifications

Order number
713432422
Original number
TX4414 400V
Electric connection
 
Voltage V
3x400
Power motor kW
5,5
Power coolant pump motor W
100
Capacity
 
Center height mm
220
Distance between centers mm
1280
Swing over bed mm
440
Swing over carriage mm
250
Bed width mm
300
Head
 
Number of speeds
12
Spindle speed min-1
40-2200
Spindle cone MC
6
Spindle nose Camlock DIN55029
D1-6"
Spindle hole mm
52
Threads and feeds
 
Longitunidal feed mm/rev
0.05-0.752 (44)
Transversal feed mm/O
0.02-0.376 (44)
Metric threads M
0.5-7.5 (44)
Inch threads Gg/1"
60-4 (44)
Trapezoidal threads D.P.
120-8 (44)
Modular threads M.P.
0.25-3.75 (44)
Carriage
 
Travel tool post slide mm
153
Travel cross slide mm
290
Tool changer height mm
25x25
Tailstock
 
Tailstock cone MC
4
Tailstock travel mm
180
Product information
 
Length mm
2400
Width mm
1150
Height mm
200
Weight kg
1630,00
Stock
Legend: In stock. Limited in stock. Out of stock.

Accessoires

data is loading
€ 138,50 excl. VAT
-3%
From
135,00 excl. VAT
€ 112,00 excl. VAT
-3%
From
109,00 excl. VAT
€ 14,90 excl. VAT
-3%
From
14,50 excl. VAT
€ 27,60 excl. VAT
-3%
From
26,90 excl. VAT
€ 54,00 excl. VAT
-3%
From
52,50 excl. VAT
€ 1 095,00 excl. VAT
-3%
From
1 065,00 excl. VAT
€ 159,00 excl. VAT
-3%
155,00 excl. VAT
From
1 545,00 excl. VAT

Consumables

data is loading
€ 265,00 excl. VAT
-4%
255,00 excl. VAT
€ 61,00 excl. VAT
-2%
59,50 excl. VAT
€ 280,00 excl. VAT
-4%
269,00 excl. VAT
€ 42,60 excl. VAT
-3%
41,50 excl. VAT

Locate dealer

Find out from which dealer you can buy the 713432422.

Compare product

Number of speeds
Travel cross slide
Power motor
Distance between centers
€ 14 455,00 excl. VAT
-2%
14 099,00 excl. VAT
16
212 mm
3/4,5 kW
800 mm
15 905,00 excl. VAT
16
180 mm
3,75 kW
760 mm
Current product
12
290 mm
5,5 kW
1280 mm
Request a quote
Variable
212 mm
5,5 kW
800 mm
19 995,00 excl. VAT
Variable
180 mm
3,75 kW
760 mm